Performance range

Flow rate: Q=72~20000m3/h

Head: H=6.8~186m

Temperature of the medium being transported: 0 ℃~80 ℃

Maximum allowable inlet pressure: 0.6MPa

Model Description

Example: 10VAP-6JA

10- The suction diameter is divided by 25 (i.e. the suction diameter is 250mm)

VAP – Single Stage Double Suction Horizontal Split Centrifugal Pump

The divisor of a ratio of 6 to 10

J – represents the change in rated speed

A – represents the first change in the outer diameter of the impeller, followed by A, B, C, etc

Structural characteristics

The pump is installed horizontally, with the pump casing horizontally separated from the axis. The upper part is the pump cover, and the lower part is the pump body. The suction and discharge ports are both on the pump body below the pump axis, with the center line perpendicular to the axis. During maintenance, the inlet and outlet pipelines do not need to be disassembled, and the pump cover can be opened to remove the rotor components. The shaft seal adopts soft packing seal and mechanical seal.